Cargando...

$48.02

Buscar un distribuidor de servicio

Enlaces rápidos:

Especificaciones, detalles y asistencia Guía de ajuste del modelo

La barra de guía liviana, durable y fácil de manejar para leñadores comerciales y ocasionales que usan sierras de tamaño pequeño y mediano.

Detalles del producto

Sprocket de remaches múltiples para larga vida útil de la punta
El sistema LubriTec™ mantiene la cadena y la barra/espada engrasadas para una menor fricción y una mayor vida útil
Mejor control, menos rebote
Paso: 0,325 pulg., Calibre: 0,063 pulg., cantidad de eslabones motrices de cadena: 74
Compatible con Stihl
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Especificaciones, detalles y asistencia

Guide Bar
Product Family	AdvanceCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.325"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	1.6 mm
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	74.0
Bar Length	18"
Tail Mount	D025
Guide Bar Code	SFG
Guard Mate Compatible	No
Intenz	No
Narrow Kerf	No
Bar Nose Radius	Large
Sprocket Nose Tooth Count	12.0

General
Color	Medium Grey
Volume	5527.96 cm³
Product UOM	Each
Weight (with Packaging)	1.13 kg
Product Height	66.42 cm
Product Length	10.92 cm
Product Width	7.62 cm

Guía de ajuste del modelo

¿Necesita ayuda? Comuníquese con Servicio al cliente al 800-223-5168 o envíenos un correo electrónico a oregon.support@oregontool.com

Guía de ajuste

Obtenga más información

Volver arriba

Detalles del producto

Guía de ajuste

Stihl