Name: Oregon 18"AdvanceCut™ Guide Bar, Fits Husqvarna, Dolmar, Poulan, Makita and others (180PXBK095)
SKU: 180PXBK095

$48.02

Quick Links:

Specifications, Details & Support Fit Guide & Parts Cross Reference

This AdvanceCut™ Guide Bar is ideal for woodcutters using small to mid-size chainsaws

Product Details

Pitch: .325", Gauge: .050" - 1.3mm, chain drive link count: 72
Lubritec™ system keeps your chain and guide bar oiled for less friction and longer life
Multi-rivet sprocket for long nose life
Saw size up to 62cc
Fits Husqvarna, Dolmar, Poulan, Makita and others
WARNING: This product can expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Specifications, Details & Support

Guide Bar
Product Family	AdvanceCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	.325"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.050"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	72.0
Bar Length	18"
Tail Mount	K095
Guide Bar Code	PXB
Guard Mate Compatible	No
Intenz	No
Narrow Kerf	No
Bar Nose Radius	Small
Sprocket Nose Tooth Count	10.0

General
Color	Medium Grey
Volume	26.04 in³
Product UOM	Each
Weight (with Packaging)	1.92 Lb

Model Fit Guide and Parts Cross Reference

Need Help? Contact Customer Service at 800-223-5168 or email us at oregon.support@oregontool.com

Product Details

Fit Guide

AL-KO

Alpina

Bosch

Champion

Dolmar

Echo

Efco

Florabest

Homelite

Husqvarna

Jonsered

Makita

McCulloch

Ryobi

Solo

Talon

Replacement Guide

McCulloch