Carregando…

Oregon Harvester Double Ended Slasher Bar, 3/4

Este produto está disponível unicamente por meio de varejistas ou fornecedores de serviço autorizado.

Links rápidos:

Especificações, detalhes e suporte Guia de compatibilidade e referência cruzada de peças

Barras com depósito de extremidade dupla de 3/4 pol. projetadas para encaixe em uma gama específica de cortadoras. As barras são assimétricas.

Detalhes do produto

Equipped with specific features that facilitate superior performance for a multitude of timber harvesting applications
The induction hardening process increases the longevity of your guide bar with precision heat-treated rails and added resistance to wear and chipping
Achieve higher productivity output with our straight and square-milled grooves that are designed for consistency, stability, and decreased wear
Engineered with high-grade alloy steel to minimize wear, chipping, and spreading
LubriTec increases the life of your guide bar and saw chain with advanced precision to allow the chain drive links and oil to have closer contact, significantly reducing oil waste

Especificações, detalhes e suporte

Harvester Guide Bars
Product Family	Harvester Bar DE
Guide Bar Code	DEC
Bar Length	58"
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/4"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.122"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	89.0
Tail Mount	9135

General
Volume	0.13 hl
Product UOM	Each
Weight (with Packaging)	33.8 Lb

Guia de compatibilidade de modelo e referência cruzada de peças

Precisa de ajuda? Entre em contato com o Atendimento ao Cliente ligando para 800-223-5168 ou enviando um e-mail a oregon.support@oregontool.com

Guia de compatibilidade

Guia de substituição

Voltar para o início

Detalhes do produto

Guia de compatibilidade

Forest Equipment Co. (FEC)

Hudson

Waratah

Guia de substituição

CSI

GB

John Deere

TRAIL