Name: Oregon S68 AdvanceCut Chainsaw Chain for 20-Inch Bar -68 Drive Links – fits DeWalt ddcs677b
SKU: S68-21

Oregon S68 AdvanceCut Chainsaw Chain for 20-Inch Bar -68 Drive Links – fits DeWalt ddcs677b

This product is only available through retailers or servicing dealers.

Shop Retailers

Quick Links:

Specifications, Details & Support Model Fit Guide

The Oregon S68 is designed to fit all chainsaw brands, with models that require a 3/8 Inch pitch, .050 Inch (1.3 mm) gauge, with 68drive links. Fits chainsaw models from DeWalt

Product Details

Fits several chainsaw models including but not limited to: 【Husqvarna】136, 137, 235E, 240, 338XPT【Echo】CS-370, CS-400, CS-2800, CS-2900, CS-3000, CS-3450 【Poulan】2150, 3816 【Homelite】23AV, 3300, UT10586, UT10588
Also fits: 【Remington】RM4218【Craftsman】316.38090, 358.34118, 358.34190, 358.35038, 358.35048, 358.35088, 358.35099, 358.35161; See image of back of package for a list of saw models this chain fits
Ideal for DIY homeowners – Capable of handling tough jobs; Ideal for home yard work and cutting storm damaged trees; Cuts smoothly, semi-chisel chain is more tolerant of dust and dirt; Engineered for safety, meets UL and ANSI low kickback requirements
Automatic oiling for longer lasting chain – LubriTec is designed to deliver the best possible lubrication for your chain so you can work smarter and your saw lasts longer
Your chain stays sharper longer. All Oregon chain cutters have an outer layer of industrial chrome for a harder surface; Hardened rivets create a high-quality, load-bearing surface for reduced wear, increased strength and fewer tension adjustments

Specifications, Details & Support

Saw Chain
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link..	3/8" Low Profile™
Chain Type	91PX
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.050"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	68.0
Bar Length	20"

General
Volume	0.44 dm³
Product UOM	Each
Weight (with Packaging)	0.56 Lb
Net Weight Carton	3.33 Lb

Low kickback Saw Chain Warning

Model Fit Guide

Need Help? Contact Customer Service at 800-223-5168 or email us at support@oregonproducts.com

Product Details

Fit Guide

Dewalt