Name: PowerSharp® Chain and Stone, 16"
SKU: PS56E

This product is only available through retailers or servicing dealers.

Quick Links:

Specifications, Details & Support

Take the next leap in saw chain technology. PowerSharp is an easy-to-use, precision sharpening system that gives chainsaw users the power to sharpen their chain in a matter of seconds with a simple-to-use attachment. Go From dull to sharp in as little as 3 seconds. The Oregon PS56E 16" PowerSharp chain is as durable and hardworking as other Oregon 3/8-inch pitch, low-profile chain. PowerSharp is a system that includes the PowerSharp Chain, the PowerSharp Guide Bar (not included), and the Bar-Mount Sharpener (not included) working together; they provide a fast, simple, and portable method for sharpening saw chain with precision.

Product Details

Pitch: 3/8" Low Profile, gauge: .050", drive link count: 56
Replacement chain and sharpening stone for the portable bar-mount sharpener.
Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance
Powersharp Chain and Stone must be used with a bar mount sharpener. Do not sharpen chain with a chain file or grinder.
For saw sizes up to 42 cc

Specifications, Details & Support

Saw Chain
Product Family	PowerSharp®
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link..	3/8" Low Profile™
Chain Type	91PS
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	1.3 mm
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	56.0
Bar Length	40.0 cm
Narrow Kerf	No
File Size
Package Type	Clamshell Loop

General
Volume	33.13 in³
Product UOM	Each
Weight (with Packaging)	0.64 Lb